220V PTC heating film

1.PTC Warmfloor 2.Low voltage,safe 3.PTC technology,energy-saving 4.Easy installation 5.ISO,UL,ROHS,CE

Product Name: 220V PTC Heating Film

PTC Warmfloor is the most versatile heating system on the planet. It was designed for the ultimate in comfort 

and versatility. No other system offers the simplicity, reliability, and versatility of our innovative self-regulating, low-voltage electroplastic element.

 

Advantages

PTC Gutter Deicing panel is designed to solve problems with snow buildup, ice damming and creation of icicles over entrances, garage doors, pathways, etc.PTC Gutter Deicing is embedded between two layers of vinyl to ensure that the panel is protected against UV rays and other physical damages.PTC Gutter Deicing  panel operates on 12 volts and is connected to a step down power supply making it safe to use.PTC Gutter Deicing  is self-regulating and cannot overheat, thereby using very little electricity.PTC Gutter Deicing  panel is light weight, easy to install and can be cut to size on the job site.

PTC Warmfloor Products List

PTC heating element

Transformer

Thermostat

Connectors – Crimping clips

Crimping tools

Sealant Tape to seal the connections

Wire Black and White

Insulation layer

Fixing Tape - to fix the Element to the sub-floor however it can also be nailed /stapled to the sub-floor avoiding the outer bus braids

 

Frequently Questions about PTC Warmfloor 

A1. What is PTC Warmfloor? How safe is the product?

PTC Warmfloor is a strong, flexible, thin plastic heating mat. It is made of an innovative polymer blend that heats when electricity is passed through the material. Unlike other types of radiant floor heating, PTC Warmfloor has the unique ability to self-regulate. So it will not overheat. To provide power continuously along its length, a flat bus braid is embedded in the plastic sheet heater along each edge. Our system is energy efficient when continuously heat, allowing the self-regulating nature of the heating elements to control the floor temperature.

PTC Warmfloor is a very safe product and ideally suited for bathrooms and other wet environment. Because it is mainly a polymer, it will be unaffected by moisture. PTC Warmfloor is a low voltage system (24V)

A2. How long has PTC Warmfloor been used?

The self-regulating polymer technology was developed in 1981 and first used to provide heated seats for automobiles.  Since then the technology has been used in a variety of applications, including the floor covering area.  Hundreds of thousands of square feet of PTC Warmfloor have been installed globally. 

A3.What type of floors can PTC Warmfloor be used under?

PTC Warmfloor provides such even and gentle heating that it  can be used under almost any flooring including carpet, vinyl, laminate, marble, stone, tile and even under wood.

A4. Can PTC Warmfloor heat my whole house?

PTC Warmfloor can easily be used as the only heat source.  It is used in extreme cold areas such as Alaska, Norway and Ushuaia.  Using this heating system eliminates the need for a forced air furnace, which blows dust and particles around.  Each room can be individually controlled.

A5. Can I use PTC Warmfloor to just take the chill out of my floor?

Yes, floor warming is a perfect fit for PTC Warmfloor. Bathroom floors will be pleasantly comfortable on your bare feet in the morning.  The system can be used for floor warming in a single room while a different heat source is used to heat the whole house.  Remember that other rooms can also benefit from a warm floor - kitchens, foyers, dens, family rooms - really, any room!

 A6. Is it difficult to install PTC Warmfloor

PTC Warmfloor  is very easy to install.  It was designed with simplicity and the installer in mind.  Cut the elements with scissors to length, connect the wires and secure in position on the floor.

A7. Why do my PTC elements not heat up before the finished floor is installed?

Based on the self-regulating nature of our heating elements, the surface temperature of an element will not be warmer than the skin on your hand until it is embedded in some thermal mass and the generated heat can accumulate.The true test of heater operation before placement of the finished floor is through current measurements of the individual elements. A more simple test is to place a rug or blanket over the elements until the heat can accumulate and be noticeable to the touch. Please note that the normal skin temperature is 86°F and even when generating heat, the elements run cooler than this.

220V PTC heating film