Jiangsu Yabao Insulation Material Inc.
Main products:PI Film,Insulating materials,F46 Composite films
Products
Contact Us
  • Contact Person : Ms. Xiang Dolly
  • Company Name : Jiangsu Yabao Insulation Material Inc.
  • Tel : 86-514-88987148
  • Fax : 86-514-88989192
  • Address : Jiangsu,Yangzhou,Liubao Industrial Zone, Baoying County, Yangzhou City, Jiangsu Province. China
  • Country/Region : China
  • Zip : 225800

(Yabao Supply All Thickness)PI Film/Polyimide Film(With Technical Data of Nominal Thickness&Other Thickness )

(Yabao Supply All Thickness)PI Film/Polyimide Film(With Technical Data of Nominal Thickness&Other Thickness )
Product Detailed
1.Certificate:UL,ISO 2.Accept OEM&ODM 3.20-year experience&5 Product-line 4.Type:PI Film/Polyimide Film 5.High Performance

Polyimide film is synthesized by polymerizing PMDA and ODA in strong polar solvents through the process of forming film and imine treatment at high temperature, which possesses excellent physical, chemical, and electrical properties,atomic radiation resistant, solvent resistant, low & high temperature resistant, It performs successfully in the wide range of temperature as low as -452F(-269c) and as high as +500F(+260c). Because of its unique excellent properties, it is the most ideal choice in many applications. The following table lists the main technical data of nominal thickness available, for other thickness, please feel free to contact us.

Data form

Item

Properties

Unit

Values

μm

12.5

25

30

40

50

75

1

Density

g/cm3

1.42±0.02

2

Tensile Strength

MD ≥

MPa

160

185

175

160

155

150

TD ≥

155

170

160

150

140

135

3

Elongation at rapture ≥

%

60

4

Shrinkage (only for reference)

150°C 30min ≤

%

0.15

400°C 30min ≤

2.0

5

Breakdown Strength(48~62Hz)

Average

MV/m

210

210

190

170

160

150

Individual

190

190

180

160

135

120

6

Surface Resistance 200°C

Ω

≥1.0×1013

7

Volume Resistance 200°C

Ω·m

≥1.0×1010

8

Dielectric Constant (48~62Hz)

---

3.5

9

Loss Tangent (48~62Hz)

---

≤0.004

Application1.For wrapping of magnet wire and cable, slot liner insulation,interlayer insulation in Motor, transformer etc.                           2.The backing material for Polyimide pressure-sensitive adhesive tape.                                                               3.The substrates or overlay of Flexible Printed Circuits Board (F-PCB).                                                         4. Polyimide tubing. 

About factory

Jiangsu Yabao Insualtion Material Co., Ltd. was established in 1986,specializing in producing insulation materials:

Polyimide film series:

Polyimide Film 6051

Corona-resistant Polyimide Film (CR Film)

Polyimide Film with F46 (FEP) Tape

Adhesive tape series

Polyimide Film with Acrylic Adhesive Tape

Polyimide Film with Silicone Adhesive Tape

Composite material series

Composite material (NHN, NMN)

Mica insulation material (mica tape, mica foil and mica board).

 Packing

The tape roll and disc should be rolled up on a pipe core whose internal diameter is about 76mm, and then the tape roll and disc should be packed into a plastic bag with good sealing, and then be transported into a wooden box with damp-proof paper or into a dry and clean carton.

The roll over 300mm will be clamped with pads at both ends and packed in a dry and clean impact-resistant carton.

The roll less than 300mm will be sealed in a paper box, and then placed in a dry and clean carton.The product acceptance certificate should be accompanied with each package. 

(Yabao Supply All Thickness)PI Film/Polyimide Film(With Technical Data of Nominal Thickness&Other Thickness )



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.